Large factory process Years of production experience Provide you with reassuring products.Stable performance ears of production experience rovide you with reassuring products.Widely used Widely used in construction industry, pavement engineering, bridge engineering and other industries.The stone is fed from the feed inlet and slides down the sieve plate. The ore on the sieve is crushed by the carbide hammer on the high-speed rotating rotor during the falling process, and flies to the liner plate in the abrasive chamber at a high speed in the tangent direction. The liner plate knocks the ore back and collides with other ores thrown out behind the rotor, so that the ore continues to be crushed. The material enters the abrasive chamber and is crushed by the plate hammer on the rotor, Then enter the abrasive chamber for continuous crushing. The crushing of materials in the abrasive chamber not only forms the crushing of materials, but also completes the shaping of materials in the chamber until the particles become the required size, and the formed sand is discharged from the outlet.(1) The discharging particle size is small, the particle size is uniform, and the production capacity is large;
(2) The service life of hammer is long and the supporting power is small;
(3) Simple process, simple structure, convenient maintenance and stable operation;
(4) The equipment investment is lower than the traditional process equipment of the same scale, and the output efficiency is higher than the traditional process equipment of the same scale (taking limestone as an example: the particle size of the primary finished product is ≤ 5mm); The long-term operation and maintenance cost is lower than that of traditional process equipment of the same scale.
(5) The hydraulic push-pull cavity opening mode is adopted to facilitate the replacement of wear-resistant parts, reduce labor costs and reduce labor intensity. So as to reduce the production cost.